If you have any problems starting ClearView, or if you see a black screen in 99% of the cases the reason is that you need to upgrade your video driver to the latest one. If you ever have a problem with. This E-Sky USB controller works very well with ClearView and is only about $30. You can get one from E-Bay, just click on. Only US$9.41, buy best FPV Racer Simulator with Dongle Cable for Flysky Esky Radiolink Futaba Remote Controller sale online store at wholesale price.US/EU warehouse. Vehicle GPS Tracker. Sending data(Location,speed and so on) according to the interval you set, connect various of sensors.

The USB side of the adapter behaves like a standard USB joystick (HID-Device). Therefore you don't need a driver for Windows or Linux (tested with Windows XP, Windows 7 and Ubuntu 9.10).

In Mac OS it should work well too, but this is not yet tested. The Rippingtons Built To Last Download Free. The adapter is ideal for use with a model aircraft simulator on the PC. PPM Most R/C remote controls provides a so-called PPM-signal. It consists of a pulse train with about 0.4 ms long pulses. The time interval t n between the pulses corresponds to the stick-position of each channel. A time of 1.5 ms corresponds to the center position, 1ms is the minimum and 2ms is the maximum position. A pulse train consists of n+1 pulses - for 5 channels thus 6 pulses.

The pulse train is repeated every 20ms (50Hz). Bild 4: The schematics of the PPM2USB adapter The circuit is quite simple and can be build on a breadboard or on a perfboard. The resistors and Zenerdiodes provide the USB-required voltage levels. The PPM signal is connected directly to the ICP-pin of the ATmega8. This works with signal levels from 1.5-5V. For the right timing an external 12MHz crystal is used.

Note: The ISP circuitry for programming the controller was left in the schematic way. PPM2USB with USBASP-Hardware It is also possible to modify an USBASP-Dongle:. Software The software was developed with the AVR-GCC tool chain and consists of three parts: PPM decoder The PPM decoder is completely interrupt driven. To measure the time, a 16 bit timer is used which is directly connected to the CPU clock (12MHz). USB stack The ATmega8 has actually no USB interface. However, it is possible to implement such in software. For this purpose the free USB stack called is used.

Main program In the main program V-USB is initialized. Then the controller goes into a infinite loop and transfers new joystick positions to the PC. It will only transfer data when the stick positions have changed. This is indicated by brief flashes of the LED.

Download • The included hex file is compiled for a ATMega8. The source code can be easily adapted to other AVRs (if they are supported by V-USB). • For programming, the can be used.

• Fuses: external crystal (lfuse: 0xEF, hfuse: 0xC9) • You may not use this work for commercial purposes •, Flying-Model-Simulator FMS For simulating model airplanes you can use the Free Flight Model Simulator (FMS).